OPERATE VEHICLE TO VERIFY CONCERN;CHECK ALL STEERING LINKAGES FOR LOOSENESS AND FIT;CHECK SHOCKS AND STRUTS AS APPLICABLE;CHECK TIRE CONDITION AND WEAR; CHECK STEERING COMPONENTS, RUBBER MOUNTS AND BUSHINGS
TOW
TIRE DISPOSAL
MOUNT AND BALANCE 2 TIRES
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
TIE ROD &/OR END – Remove & Replace – Inner & Outer,Right Side
CONTROL ARM – Remove & Replace – Automatic Trans Lower,Right Side – [DOES NOT include alignment.]
BALL JOINT – Remove & Replace – Lower,Right Side – [DOES NOT include alignment.]
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Right Side – [DOES NOT include alignment. NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
ALIGNMENT
VALVE COVER GASKET – Remove & Replace – Eng VIN R,Eng CD 1ZZ-FE
DOUG T. gave our service a 5 star review on 12/31/2024
Scan computer data,check for codes. Remove 2 accesible spark plugs and evaluate. Remove air filter and evaluate. Check fuel pressure, volume, and ability of fuel system to hold pressure. Perform pin point test for indicated code. Check TSB,s and pattern failures.
SPARK PLUGS – Remove & Replace
LUBE OIL FILTER
BATTERY – Remove & Replace – [Includes: Test.]
MARK H. gave our service a 5 star review on 11/6/2024
Scan computer data,check for codes. Remove 2 accesible spark plugs and evaluate. Remove air filter and evaluate. Check fuel pressure, volume, and ability of fuel system to hold pressure. Perform pin point test for indicated code. Check TSB's and pattern failures. Check charging systems. Analyze ignition system and four gas readings.