BRAKE SHOES &/OR PADS – Remove & Replace – Front or Rear,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
NOTE: PERFORMED IN CONJUNCTION WITH BRAKE SYSTEM COMPLAINTS, AND NOISE WHILE BRAKING. INCLUDES FLUID CHECKS; INSPECTION OF LINES AND HOSES; INSPECTION OF FRONT AND REAR LININGS; INSPECTION OF ROTORS AND DRUMS INCLUDING THICKNESS AND RUN-OUT AS NECESSARY;AND ROAD TEST.
BILL S. gave our service a 5 star review on 12/1/2021
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Right Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
BRAKE SHOES &/OR PADS – Remove & Replace – All – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
LUBE OIL FILTER
ROGER S. gave our service a 5 star review on 10/22/2021
BRAKE SHOES &/OR PADS – Remove & Replace – Front,Both Sides – [Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.]
CONTROL ARM – Remove & Replace – Lower,Both – [DOES NOT include alignment.]
LUBE OIL FILTER
Scan computer data,check for codes. Remove 2 accesible spark plugs and evaluate. Remove air filter and evaluate. Check fuel pressure, volume, and ability of fuel system to hold pressure. Perform pin point test for indicated code. Check TSB's and pattern failures. Check charging systems. Analyze ignition system and four gas readings.
JOE M. gave our service a 5 star review on 4/15/2021
Scan computer data,check for codes. Remove 2 accesible spark plugs and evaluate. Remove air filter and evaluate. Check fuel pressure, volume, and ability of fuel system to hold pressure. Perform pin point test for indicated code. Check TSB's and pattern failures. Check charging systems. Analyze ignition system and four gas readings.
RICKY B. gave our service a 5 star review on 3/30/2021
INTAKE MANIFOLD – Remove & Replace – All Applicable Models
Scan computer data,check for codes. Remove 2 accesible spark plugs and evaluate. Remove air filter and evaluate. Check fuel pressure, volume, and ability of fuel system to hold pressure. Perform pin point test for indicated code. Check TSB,s and pattern failures.
PRESSURE TEST COOLING SYSTEM; CHECK THERMOSTAT OPERATION; CHECK FOR LEAKS; CHECK FAN OPERATION; INSPECT RADIATOR AND HEATER HOSES; CHECK CONTROL FUNCTIONS.
RADIATOR – Remove & Replace – All Applicable Models – [Includes: R&I Air Conditioning Condenser. DOES NOT include Air Conditioning System recover, evacuate and recharge.]