PRESSURE TEST COOLING SYSTEM; CHECK THERMOSTAT OPERATION; CHECK FOR LEAKS; CHECK FAN OPERATION; INSPECT RADIATOR AND HEATER HOSES; CHECK CONTROL FUNCTIONS.
LUBE OIL FILTER
THERMOSTAT – Remove & Replace – Water Pump Outlet
DAVID C. gave our service a 5 star review on 1/11/2024
OPERATE VEHICLE TO VERIFY CONCERN;CHECK ALL STEERING LINKAGES FOR LOOSENESS AND FIT;CHECK SHOCKS AND STRUTS AS APPLICABLE;CHECK TIRE CONDITION AND WEAR; CHECK STEERING COMPONENTS, RUBBER MOUNTS AND BUSHINGS
STEERING GEAR – Remove & Replace – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.]
(Combination) – TIE ROD &/OR END – Replace Each
ALIGNMENT
OTIS Y. gave our service a 5 star review on 1/5/2024
NOTE: PERFORMED IN CONJUNCTION WITH BRAKE SYSTEM COMPLAINTS, AND NOISE WHILE BRAKING. INCLUDES FLUID CHECKS; INSPECTION OF LINES AND HOSES; INSPECTION OF FRONT AND REAR LININGS; INSPECTION OF ROTORS AND DRUMS INCLUDING THICKNESS AND RUN-OUT AS NECESSARY;AND ROAD TEST.
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Right Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
KARIS C. gave our service a 5 star review on 1/4/2024
STEERING GEAR (COMPLETE) – Remove & Install or Remove & Replace – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.]
(Combination) – TIE ROD &/OR END – Remove & Replace Both
ALIGNMENT
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
JUDY E. gave our service a 5 star review on 12/1/2023